Announcement

Collapse
No announcement yet.

Which driver is the correct one for gen4-uLCD-35DCT-CLB

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Which driver is the correct one for gen4-uLCD-35DCT-CLB

    Hi,

    I have a gen4-uLCD-35DCT-CLB display, which a connect to my computer through a programming cable, a uUSB5-PA5 and a gen4-PA.

    However, in the comms ribbon over my workshop program the display does not show up. Nothing shows up and the circle remains violet.

    I have downloaded the drivers from these pages:

    http://www.4dsystems.com.au/product/gen4_PA/

    http://www.4dsystems.com.au/product/...ramming_Cable/

    http://www.4dsystems.com.au/product/uUSB_PA5/


    What am I doing wrong?

    Thanks in advance!

  • #2
    Hi Baxter,

    The gen4_PA driver should be ok for both the gen4_PA and the uUSB-PA5. What version of windows are you running and do either adapter adapter appear in device manager.

    Best regards

    Paul

    Comment


    • #3
      I am using Win7 and it does appear in the Device Manager as FT32R USB UART

      Comment


      • #4
        nvm got it to work thanks !

        It was this one: http://www.ftdichip.com/Drivers/VCP.htm

        which I had to install twice, once with the .exe and once over the device manager

        Comment

        Working...
        X