Announcement

Collapse
No announcement yet.

Delay after reset

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Delay after reset

    Hi guys. I changed some files in my 4d display program and upon starting my arduino and display again I noticed extreme lag in response time to the screen. I have a few sensors hooked up that display on gauges. After much fault finding I decided to try a larger delay after the reset code (5 sec). This has solved my issue it seems. Could it be that due to increased file side on uSD card it needs a longer delay? Sorry if this has been covered. Just want to make sure I know what was happening.

    Cheers!

  • #2
    ooops Sorry I have re-read the first post and it clearly states this in there! Sorry. Mod delete if possible

    Comment


    • #3
      Hello,

      It's great that you manage to run your program.
      Delay function is used to suspend execution of
      a program for a particular time.This is necessary
      if you got some graphics that needed to be load
      first from the uSD card. This explains why your
      getting lag on your program.

      Best regards,
      Bern

      Comment

      Working...
      X