Announcement

Collapse
No announcement yet.

Installing 4DPi-32 on RPi3-B+ possible?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Installing 4DPi-32 on RPi3-B+ possible?

    Dear all, simple question: is it possible to install 4DPi-32 (rev 1.3) on RPi3-B+ and in case yes, does exist manual how to do it?

    Regards, Vlado

  • #2
    Hello,

    I have tried the latest kernel version with the latest Raspbian OS on a Raspberry Pi3 B+ and the 4DPi-32-II and this works as intended.
    Though, I haven't yet tried to do it on 4DPi-32 I cannot see a reason why it should not work.

    By following the datasheet for 4DPi-32, you should be able to use the 4DPi-32 as your Primary Display for the Raspberry Pi.

    Since the image file on the datasheet is different, you can use the latest kernel image using this command:
    Code:
    wget http://www.4dsystems.com.au/downloads/4DPi/All/gen4-hats_4-14-34_v1.1.tar.gz
    Then extract it using the command
    Code:
    sudo tar -xzvf gen4-hats_4-14-34_v1.1.tar.gz -C /

    I hope this helps.

    Best Regards,
    Kevin

    Comment


    • #3
      Thanks Kevin, it works ok.

      Regards, Vlado

      Comment


      • #4
        Hi,

        I am glad that it works for you.
        If you still have any concerns, please don't hesitate to ask.
        We'll assist you as much as we can.

        Best Regards,
        Kevin

        Comment

        Working...
        X