Announcement

Collapse
No announcement yet.

Ucam Communication with dot net.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • chatty
    replied


    Thanks Dr Acula.

    i am looking at your post

    Leave a comment:


  • Dr_Acula
    replied


    Hot off the press, see the other thread "help interfacing the ucam" with the vb.net code. It is not optimised and certainly could run a lot faster if bytes are not captured along the way. But it can capture a 320x240 picture in a few seconds and save it as a jpeg and also display it.
    Attached files

    Leave a comment:


  • chatty
    replied


    Thanks Tim, for your answer and sorry for late reply.

    I am still figuring this out. Could you please post your code here? or send me on my email ID?

    My email ID is [email protected]. I appreciate your help!!

    Thanks,
    Chatty

    Leave a comment:


  • TimW
    replied


    Hi Chatty,

    I've just integrated UCAM RS232 with a WaveCom GPS/GPRS modem using the 232 interface. I used the following link to help me.

    http://bansky.net/blog/2008/03/jpeg-camera-and-micro-framework/comments.html

    Good luck.

    Tim

    Leave a comment:


  • chatty
    started a topic Ucam Communication with dot net.

    Ucam Communication with dot net.

    Hello Guys,

    I am new to this forum and this is my post.

    Can anyone post here dot net code to communicate with Ucam?

    Thanks in advance
Working...
X