Announcement

Collapse
No announcement yet.

Test FAT16runprog

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Test FAT16runprog

    Hi ! ( sorry for my bad english , i'm french student )

    I've tried in workshop "FAT16runprog" .
    I put on my uSD : CLOCK.cfg ; CLOCK.4XE and CLOCK.4dg and after i put my SD in my uOLED-32028-P1T.

    I uploaded the programe in workshop on the 32028-P1T, i touched the button "clock" , he lauched "CLOCK.4XE" and after this he wrote "error 2 "

    error 2 = CARD not present.

    What'is the problem ? Does he see my file on SD and after this he say the uSD is not present ?

    Thanks

  • #2


    you can do a file_Dir command and check its there - its not in a folder is it ? - need to be in the root of the uSD card

    Comment


    • #3


      Hello and thank you for the reply

      Yes the files is in the USD and the files that is in the root of the micro SD

      Comment


      • #4


        Ok problem fixed , i replace at ligne 164 : file_Run(tempstr,0); by file_Run("CLOCK.4XE",0);

        And he work lol , the original program have a error of code ( i think )

        Comment


        • #5
          You should be using the FAT16RunProg program from the

          Picaso GFX2\Picaso General folder

          The stuff in the 'Picaso' folder is for an older version of GFX and the compiler and whilst a lot provide 'samples' not found in the newer folder, there are a few that just don't work properly anymore
          Mark

          Comment

          Working...
          X