No announcement yet.

Development workstation

  • Filter
  • Time
  • Show
Clear All
new posts

  • Development workstation

    In my never-ending quest to keep my lab space somewhat organized, I came up with a development workstation for the 32PT. See attached photos.
    It is made from foam-core board mounted at a 60-degree angle, glued together with gel superglue. The pegs are cut from the tips of large bamboo skewers, blunted to be less dangerous, and glued into holes drilled in the board. These hold the display in place but allow the orientation to be changed easily between landscape and portrait.
    The proto-board on the right is attached with double-sided foam tape at the corners. The space at the upper left may get a second proto-board.
    Attached files