Announcement

Collapse
No announcement yet.

Somo14D "3D model".

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Somo14D "3D model".

    Hello,
    Would you have the Somo14D "3D model" STP, 3DS, (LIB, IDX) or other format for 3D PCB?
    For Eagle, Ares or other.

    Best regards.

    Nerixs

  • #2


    Hello,
    4dTechSupport can you help me?
    cordially

    Comment


    • #3


      We have 3D models for most of our display products. There is no 3D model for the SOMO and I'm not sure what the plan is. I can check with our engineering team and get back to you (when they return from their annual leave).
      Atilla

      Comment


      • #4


        Thank you, it's really nice!

        I hope they will be able to do that.

        cordially

        Comment


        • #5


          Hello NeriXs,



          As per your request, I have created a 3D model for the SOMO-14D for you.



          Please note, a model for the uSD card was not available, so a simple shape has been put in its place. Also please note the headers may not be identical to the ones used, however the spacing etc should be correct.



          Use the model as a reference only, while all efforts are made to ensure the model is correct, it cannot be guaranteed.



          Links contains both STEP and IGES format 3D Models.



          http://www.4dsystems.com.au/downloads/3D-Models/SOMO/



          I hope they work for your requirements. Any questions, please reply back.



          Regards
          James

          Comment


          • #6


            Hello,
            Thank you for the work!
            Do you know how I can export to Proteus ISIS / ARES?
            cordially

            Comment


            • #7


              Hi NeriXs,
              Sorry no I don't - I haven't used that software before.You requested STEP (STP) however so I assumed you would be able to use the file.
              Regards
              James

              Comment


              • #8


                Hello,

                I can not convert the file to ares!
                Can you save them to another format?
                Best regards.

                NeriXs

                Comment


                • #9


                  Please let me know what format you require, and ill try and determine if I can convert it.
                  James

                  Comment


                  • #10


                    Ares libraries are Composed of Two files (IDX and LIB).
                    Ares Also supports 3DS files.
                    I Can Simply convert RealWord with a U3D file in 3DS.
                    Cordially.

                    Comment


                    • #11


                      Ok - Never used a U3D file, but our software is capable of saving it in that format. Hopefully that helps.

                      Not sure what it will come out like, but worth a try.



                      Regards


                      Attached files SOMO-14D-U3D.zip (553.3 KB)
                      James

                      Comment


                      • #12


                        The file is not compatible with RealWord!
                        I can not convert it to 3DS.
                        There is probably a setting on the souce! But what?

                        Comment


                        • #13


                          I will take another look at this later today.
                          I did a google search and found this site, which suggests how to open STEP (STP) files in Ares.
                          Having never used or seen Ares before, its hard for me to tell you what to do, but this might help.Go to the very bottom of the page, and the 2nd link from the bottom is a download which contains a PDF file. Its in French so you will need to convert most likely. I haven't read it, but it might help you.
                          http://www.sonelec-musique.com/logiciels_proteus_lib_en.html
                          Regards
                          James

                          Comment


                          • #14


                            I converted the STEP file in STP.
                            After the STP with Blender exported to 3DS format, but this one is unreadable.
                            I do not know why, with other STEP files it works!

                            Comment


                            • #15


                              Not sure if you will get a different result or not, but try importing the IGES file into Blender and see if your 3DS format then works.
                              Whenever converting CAD files between applications, you often get incompatibilities of some sort. There should be a combination that works however.
                              Try the IGES in the first link, and report back.
                              Regards
                              James

                              Comment

                              Working...
                              X