Announcement

Collapse
No announcement yet.

uCamTTL and 4D programming cable

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • uCamTTL and 4D programming cable

    Hi, altough the datasheet of ucam-ttl says the vcc is 3.3v, the same datasheet show a connection between the ucam-ttt and the usb-ce5, the usb-ce5 deliveries 5V, so I would like to know if i can connect the ucam-ttl with the 4d programming cable, which deliveries 5V too



    Thanks for yours answers




    PD: I don't know speak english very well,so if you don't understand me, please say to me.

    Attached files

  • #2


    There should be a caption on that diagram that reads something like "The uCAM-TTL can be powered by 5V temporarily, for testing debugging."
    Mark

    Comment


    • #3


      Thank you for your answer.

      I reviewed the datasheet (http://www.4dsystems.com.au/downloads/micro-CAM/Docs/uCAM-DS-rev7.pdf) and I donĀ“t found the caption, so can you say me if they specified the aproximate time and say it to me.



      Thanks and bye!!

      Comment


      • #4


        Yeah, the manual is going to get updated.



        15mins max
        Mark

        Comment


        • #5


          Thank you!, How can I put the post as solved?

          Comment


          • #6


            Unfortunately you can't, this forum doesn't have such niceties
            Mark

            Comment

            Working...
            X