Announcement

Collapse
No announcement yet.

touch screen documentation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • touch screen documentation

    Dear sirs,

    in 3.4 section of Picaso-SGC command set manual, revision 11.0, at page 48, i reed:
    "Touch screen must be enabled to be able to use the touch commands. To enable touch screen, See section 2.1.6"

    This section is not in the manual.
    Where can i find this chapter ?

    I have try to use the touch screen functions without initialisation but, of course, the commands dont work.

    I use a uLCD43 SGC
    Hardware Rev: 10
    Software Rev: 21
    PmmC Rev: 1

    I apologize you for my bad english, but i learned it by myself.

    Thank you very much for your help
    Best regards

    Jacopo Faggioni

  • #2


    It's in section 3.1.7 of the R11 manual
    Mark

    Comment

    Working...
    X