Announcement

Collapse
No announcement yet.

I'll remove the rs232 from the so...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I'll remove the rs232 from the so...

    first question!

    Hi people...

    my congratulations for the design of this device, I've for now only one ucam but works very well... so my silly question is, I need use this ucam with a microcontroller so i'll remove the rs232 converter (I don't have a voltmeter) Is the ucam alimentation 5v right? or 3.3 x.x cause I m put a voltage of 5v on the rs232 converter so i don't know if is the same voltage on the ucam board

    regards!


    and sorry a word is missing on the title

  • #2


    They vary a bit, see Q9 in the FAQ http://4d.websitetoolbox.com/post/Camera-Modules-5365549
    Mark

    Comment


    • #3


      ok there is not problem, thanks! I'll start to cut the wires from the rs232 adapter, I'm interested on buy the 5v TTL jmm the mine I bought on rob...hop page so there was only two models... well thanks again and i ll continue asking hehe

      Comment

      Working...
      X