Announcement

Collapse
No announcement yet.

Bug 4Dscript with new version Workshop 3.3.0.16

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bug 4Dscript with new version Workshop 3.3.0.16

    When I run my script for load the my custom fonts on RAW partition i have this output:

    Drive E: contains a recognised file system

    I don't have this problem with old version of Workshop (3.2.1.4).

    Claudio

  • #2


    Can you show me the script you are using?

    Have you changed anything else? uSD card, OS, etc?
    Mark

    Comment


    • #3


      This is the script. I have changed anything. With old version of workshop it work now with current version doesn't work.

      #Run(Picaso,COM1,256000,5,Wrap)//uSD 4GB raw partition from sector 3097805 to 4646707//10 sector free space ... $timeon $writePCuSD('bitvs14.GCI','E:',preserve,3097815)//bitvs14 82432B -> 161 sectors - ADDRESS 5E89AE => AE00 5E89$writePCuSD('bitvs16.GCI','E:',preserve,3097986)//bitvs16 100864B -> 197 sectors - ADDRESS 5E8B04 => 0400 5E8B

      Comment


      • #4


        The old version would overwrite a drive with a partition table if preserve was specifed, the newer one won't.

        Change preserve to overwrite.

        Note that the 'preserve' checking errs on the side of caution, it doesn't do an exhaustive number of checks to see if a recognised file system exists, it just makes a few spot checks on sector 0.
        Mark

        Comment


        • #5


          now work

          thanks

          Comment

          Working...
          X