uLCD43 (SGC) Resetting on writing a file.

[4DSysFan]

Code?

[cj4d]

I have just implemented a function in C to write a small file (< 100 bytes) for my PIC32 application. The file is actually written OK to the SD Card but immediately the write has taken place the LCD resets itself. I am puzzled by this as I can write individual bytes and 512 blocks in raw mode perfectly OK. I've checked the 5V power line on a 'scope as I wondered in the current demand on write was causing a voltage drop - not so.

Everything else is fine the touch functions work beatifully - it's a nice piece of hardware to work with and easy to get going quickly.

The details for the LCD are:

Hardware: 10
Software: 22
PmmC Rev: 2

Many thanks,

cj4d