µoled 128G1h script problem

[ADVANCETOM]

Hello im using an oled 128 in SGC mode
Im built an script with FAT Controller and works inside very well !
But sorry im beginner, how to get the script on SDcard copied to start from a host controller (Raspberry pi)?
I wanna start the script with the @P command (runscript from 4DSL Program from Memory card)

But here im stucking

Can you explain me the further steps ?

Thanks Tom

[ADVANCETOM]

Here is the code



#Run(Goldelox,COM8,115200,5,Wrap)
#include "4DScript_16bitColours.inc"

/****************************************************************************************
* *
* 4D Script Sample *
* *
* Date: 10 May 2010 *
* *
* Description: Demonstates most of the uSD RAW commands in script form *
* *
* Requirements: ABC400.4DScrpObj and NemoOldFmt.hex (If running this *
* from the samples folder they will be found correctly) *
* Display with uSD card with available space, *
* this will be OVERWRITTEN *
* *
* Notes: *
* *
****************************************************************************************/
$openinit
autobaud
clear

InituSD
$readCSD

//Version(1)
delay(1000)
//ScreenCopyuSD(0,0,128,128,0)
Clear
UsdImage(0,0,128,128,16,0)
delay(10000)
string(3,7,1,white,"Booting.")
delay (1000)
string(3,7,1,white,"Booting..")
delay (1000)
string(3,7,1,white,"Booting...")
delay(20000)
//$ReaduSDImage(0,128,128,'')

//clear

[ESPsupport]

If you change the environment option to 'compile' you will be able to Comp'nLoad it onto the uSD card inserted in your display.

[ADVANCETOM]

Sure this work in Workshop 3!
Which serial command can i use To Start the Script thats THE Main problem?
Maybe an example for Workshop 3 Terminal World be nice
Is ist right 40500400?
I tried this but nothing work?

[ESPsupport]

You are after the 'run script' command.

You need to include the name of your program (eg 'myprog.4ds'). Have a look at the name of the file created on the uSD card by the load process.

Remember if the filename is a long filename you will need to find and use the short filename.

Hmm, Maybe you need to force the filename on uSD in your program.

Try adding

#origin 'myprog.4ds'

to the start of your program

[ADVANCETOM]

okay i tried this her is script


#Compile(Goldelox,COM8,115200,5,Wrap)
#include "4DScript_16bitColours.inc"
#origin "oledcompile.4ds"


//$openinit
autobaud
clear

InituSD
//$readCSD

//Version(1)
delay(1000)
//ScreenCopyuSD(0,0,128,128,0)
Clear
UsdImage(0,0,128,128,16,0)
delay(10000)
string(3,2,1,red,"Booting.")
delay (1000)
string(3,2,1,red,"Booting..")
delay (1000)
string(3,2,1,red,"Booting...")
delay(20000)
//$ReaduSDImage(0,128,128,'')

//clear




now get Failure :
Program has destination of FAT Partition and Display does not support FAT,cannot download
Sounds like i have to use RMPET to make a RAW Partition right?

[ESPsupport]

Oops, my bad, I've been thinking Picaso

Remove the origin statement and it should load

And then 405000000000 should run it

[ADVANCETOM]

Thats my output from Terminal(9600) display is maybe hang up (black screen)
and no ACK ?



02:20:48 > 55 40 50 00 00 00 00
02:20:49 < 06

[ESPsupport]

Hmm, the documentation clearly says there will be no ACK, also some of the code appears odd, in the context it is done.

Here's a 'cleaner' version, with comments and a hint or two.

#Compile(Goldelox,COM2,9600,5,wrap)

#include "4DScript_16bitColours.inc"

//$openinit
//autobaud, no point in autobauding, although it doesn't actually harm anything
clear

//InituSD, we have already initted uSD otherwhise we couldn't get here, this breaks program
//$readCSD

//Version(1)
delay(1000)
//ScreenCopyuSD(0,0,128,128,0)
Clear
//UsdImage(0,0,128,128,16,0) not clear whether this is an image at this location
delay(10000)
string(3,2,1,red,"Booting.")
delay (1000)
string(3,2,1,red,"Booting..")
delay (1000)
string(3,2,1,red,"Booting...")
delay(20000)
stringG(0,0,0,0,0,0,'$') // this writes a string($) to the serial port
exit // always good to have an exit statement

[ADVANCETOM]

Thanks so much it works.....Awesome!!!!
Works fine with your code i spend a couple of time to understand all scripting issues.
Thanks to MR.X from 4DLabs

Greetings Tom

[ADVANCETOM]

How can i send 55 40 50 00 00 00 00
In a python Script ?

Or better how To send multiple hex in a String?

[ESPsupport]

Not into Python at all, but the doco here

http://pyserial.sourceforge.net/pyserial_api.html#module-functions-and-attributes

seems to imply you could put that into an array and then use 'write'

[ADVANCETOM]

Sude i have this at work sending a 0x55 Works?

I Wanne send 55 40 50 00 00 00 00


Ser.write("0x55")


But how i send 55 40 50 00 00 00 00


Can you give me an example ?
Thanks

[ESPsupport]

Would think this would work, if a bit long winded. (wouldn't expect "0x55" to work, that would just send a string and that's not what we are after here)

Ser.write(0x55)
Ser.write(0x40)
Ser.write(0x50)
Ser.write(0x00)
Ser.write(0x00)
Ser.write(0x00)
Ser.write(0x00)