DISP Ver. 0.1.1.1 doesn't support the new uLCD-24PT (SGC) manufactured in 2013?

[nhsb]

Hi,

I'm trying to change the Splash screen of recently-purchased uLCD-24PT(SGC)
with DISP Ver. 0.1.1.1. The "Load from Display" works so that I can change
the splash text. But when I try to write to LCD by pressing "Save to Display" button,
the following error message appears as a dialog box:

PmmC version 24 not supported by this version of DISP.
Pelase download a new version of DISP.

But I can't find any newer version of DISP tool.
Do you have the newer version of DISP tool which supports this uLCD-24PT(SGC)?

The label on the back-side of uLCD is:

TMSGC-R24
13021260
Warranty
Void if
Removed

which is diffrerent from any of these:
http://www.4dsystems.com.au/prod.php?id=132


BTW, I also tried to use R22 of PmmC file (uLCD-24PT-I-SGC-R22) on that LCD,
but it now only displays white screen on power-up. Seems like different PmmC file
is required for this new uLCD-24PT?

Thanks in advance

[ESPsupport]

Sorry about that, the web site needs updating, try the attached


Attached files DISP.zip (566.7 KB)

[nhsb]

Thank you for the new version of DISP tool, it worked with newer uLCD-24PT.

BTW, I wrote the older PmmC (uLCD-24PT-I-SGC-R22) to two uLCD-24PT units,
which originally had R24 PmmC. Since these uLCD-24PTs don't work any more,
I'd like to load the original R24 PmmC, but I can't find it at:

http://www.4dsystems.com.au/downloads/Serial-Display-Modules/uLCD-24PT%28SGC%29/PmmC/

Could you upload the PmmC file which works with newer uLCD-24PT(SGC)?

Thanks in advance,

[ESPsupport]

The guy that looks after the website doesn't work on weekends, so all I can do its attach it here.

At least I think this is the PmmC you need
Attached files ULCD-24PTTMSGC-R24.zip (47 KB)

[nhsb]

Thanks! That firmware worked with the new uLCD-24PT.
I really appreciate you for it.