Announcement

Collapse
No announcement yet.

How to change Baudrate in Serial mode

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to change Baudrate in Serial mode

    Starting with the serial mode is working perfect.
    Only disadvantage is the Baudrate. This is only 9600 Baud.
    How can I change this to 115200 Baud?

    Cheers

  • #2
    Found the solution on http://goughlui.com/2014/03/19/revie...erry-pi-bezel/

    Comment


    • #3
      Hi Powersoft,

      Are you using the Serial environment? You can also find the solution for your problem in the app notes. Kindly
      1. Go to http://www.4dsystems.com.au/appnotes
      2. Select "Serial" in the environment column
      3. Find and select the option "getting-started" in the sub-category column
      4. Click on the search button.
      5. You will see three Serial app notes listed. Choose according to your display's processor.

      On page 6 of the app note "Serial Goldelox Getting Started - the SPE Application" for example, it says:

      The default baud rate is 9600 and the latest firmware is loaded on to the
      display. To learn how to modify the default settings, refer to Section 2.2
      (Additional Configuration Parameters for Serial Communication) of the
      Goldelox Serial Command Set Reference Manual.
      Regards.
      Doff

      Comment

      Working...
      X