Announcement

Collapse
No announcement yet.

Diablo 7" with Arduino

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • James_4DSystems
    replied
    FYI - If looking for Diablo16 SPE, a Preliminary release is available here:

    http://forum.4dsystems.com.au/forum/...y-release-here

    Regards

    Leave a comment:


  • ESPsupport
    replied


    Very sorry about all of this.

    The SPE went to internal testing and it went well.

    During that time a few suggested improvements and enhancements were made that were all deemed worthwhile.

    Unfortunately all the above affect Picaso + Diablo + SPE + Workshop, so it was decided against making a release that would quickly be superseded with a new release, especially since there will be simultaneous update requirements to the PmmC and the SPE.

    These improvements are progressing well, but I can't immediately say when the next release will be due to the significant testing that will be required.

    Can you hold off for a couple of weeks?

    If not, I can make the release that was internally tested available to you.

    Leave a comment:


  • MasterTom
    replied


    Are there any news related to SPE? I check day by day but I couldn´t find it up to now. When is it released?

    Thomas
    (Germany)

    Leave a comment:


  • MasterTom
    replied


    For me this is very good news. Now I can replace my 4.3" with the 7" display without loosing some features. Thank you very much.

    Thomas

    Leave a comment:


  • ESPsupport
    replied


    Please don't do that, that's not what he said.

    Diablo SPE will be almost identical to Picaso SPE.

    Leave a comment:


  • oilgas
    replied


    If you tell me that will be possible send directly float data to the gauges and digits i jump from the chair !!

    Thanks

    Leave a comment:


  • James_4DSystems
    replied


    Diablo16 SPE (Serial Environment) is coming.
    ETA is the end of this week, or early next week!

    Regards

    Leave a comment:


  • MasterTom
    replied


    +1 !!!

    I just bought two uLCD-70 to replace my uLCD-43. On the description for the display you can read, that it can replace the 4.3" display easily. I´m quite sure that some weeks ago, when I selected the uLCD-70, there was no information about the missing seriall interface on your homepage. Now I´m in the situation that I have to hand over my prototype very soon, but I can not finish it. I have no idea what to do now. I do not need the complete command set of the seriall interface. Maybe you started already and can give me at least the possibillity for reading pictures from SSD card and showing them? If so I can give you a list of seriall commands I need.

    Best Regards
    Thomas
    (Germany)

    Leave a comment:


  • Falupix
    replied


    Yes. There is a need for it.



    I have just started working on a ROV operated by Arduinos and I have added 2 µLCD-43-PT at the control but when I found uLCD-70DT it was THE thing I wanted.

    Leave a comment:


  • ESPsupport
    replied


    The 7" display has Serial TTL ports.

    It doesn't have the Serial programming environment (refer Programming environments on P16 of the datasheet and "Serial Programming Environment Documentation" here http://www.4dsystems.com.au/product/10/120/Development/4D_Workshop_4_IDE/ ).

    The 7" display just seemed too powerful for it and hence it was never implemented.

    If you really feel there is a need for it, by all means speak up.

    Leave a comment:


  • oilgas
    replied


    Thanks for the answer,
    i saw the datasheet and was described the serial TTL...

    Did you plan in the future to re-start implement TTL serial ?
    For Arduino project is usefull larger display.

    Thanks again...

    Leave a comment:


  • ESPsupport
    replied


    Designer, ViSi and Genie are all available for the 7".

    There is currently no Serial.

    So if you are using one of the first lot it will be the same.

    Leave a comment:


  • oilgas
    started a topic Diablo 7" with Arduino

    Diablo 7" with Arduino

    Hi,
    Is possible interface Arduino with Diablo 7" same like the uLCD-32P 3.2" ?
    Thanks
Working...
X