Announcement

Collapse
No announcement yet.

Cannot Set Resolution to 480x800

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 7Uask
    replied
    Yea it was a bit problematic. I tried with Visi Genie too. https://9apps.ooo/download/ https://luckypatcher.pro/apk/
    Last edited by 7Uask; 5 May 2019, 06:22 AM.

    Leave a comment:


  • ESPsupport
    replied
    You will need to use Designer to get it going. Once it is working it will be possible to use it via Genie, one way or the other.

    Leave a comment:


  • Basitadam
    replied
    Can I do it via Visi Genie?

    Leave a comment:


  • ESPsupport
    replied
    Well, there's a bit of a positive side to that.

    If you can find the timing specifications for 640x350 and 720x400 you should be able to get the uVGA-III to work with that.

    Leave a comment:


  • Basitadam
    replied
    Mark,

    You are right. Even one of my monitors has max res of 1850 x 1050, does not support. Standart 17" monitor has these modes supported

    640 x 350
    720 x 400
    640 x 480
    640 x 480
    800 x 600
    800 x 600
    832 x 624
    1024 x 768
    1024 x 768
    1152 x 870
    1152 x 900
    1280 x 1024
    1280 x 1024

    Leave a comment:


  • ESPsupport
    replied
    Check that your monitor supports 480x800, many don't.

    If it supports 480x800 can you point me to its manual?

    Leave a comment:


  • Basitadam
    started a topic Cannot Set Resolution to 480x800

    Cannot Set Resolution to 480x800

    Hi everyone,

    Seems I have a problem with setting resolution to 480x800 on uVGA-III module. I am using 4D Visi Genie. I have tried on several PC monitors all thinks the resolution is 480x640 with a wrong aspect ratio. Round shapes look like elliptic. No problem with resolutions 240x320 and 480x640.

    4D IDE versions tried: 4.2.0.10 , 4.2.0.15 and 4.2.0.20 ; uVGA firmware is r44

    Thanks in advance
Working...
X