Announcement

Collapse
No announcement yet.

maximum number of objects?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • maximum number of objects?

    Hi,
    is there a maximum number of objects? If im adding a few more objects, the display is really slow and the refresh time is above 30s. The compiler says

    working version
    ----------------------------------------------------------------------------

    Note: 0 Button Animation Timers in use.
    0 errors
    0 warnings
    3 notices
    No Errors, code size = 7421 bytes out of 14400 total
    Approximate run RAM size = 7304 bytes out of 14400 total (Base:528 Disk:38 Img+Font_Controls:578 Img_elements:6160)
    Download to Flash successful.

    -----------------------------------------------------------------------------



    not working
    ------------------------------------------------------------------------------

    Note: 0 Button Animation Timers in use.
    0 errors
    0 warnings
    3 notices
    No Errors, code size = 7545 bytes out of 14400 total
    Approximate run RAM size = 7472 bytes out of 14400 total (Base:528 Disk:38 Img+Font_Controls:578 Img_elements:6328)
    Download to Flash successful.

    ---------------------------------------------------------------------------------




    Im using a 43PT with Arduino Mega
    I found this old thread with the same problem:
    http://forum.4dsystems.com.au/forum/...ber-of-objects

    Program already runs on flash mode.
    But i dont know "loadImagecontrol".

    Any other
    suggestions?

    Patric

    Attached Files

  • #2
    Hi,
    i set a higher startup (delay) time.
    Problem solved.

    Patric

    Comment

    Working...
    X