Announcement

Collapse
No announcement yet.

4D-CD-00029 ViSi-Genie Magic Arduino 32bit LED Digits 2

Collapse
This topic is closed.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 4D-CD-00029 ViSi-Genie Magic Arduino 32bit LED Digits 2

    The output of this codebase example is the same with that of 4D-CD-00004 ViSi-Genie Magic Arduino 32bit LED Digits. In this codebase example, however, the 32-bit value is displayed using a single LED digits object only (instead of four digits).

    Instructions:
    1. Compile the attached ViSi-Genie project and upload it to a uLCD-32PTU (or your target display). Copy the supporting files to a uSD mounted to the PC. Properly unmount the uSD card from the PC and mount it to the uLCD-32PTU.

    Note 1.A: Workshop 4 Pro is needed for this code example.


    2. Compile the attached sketch and upload the program to an Arduino Uno (or your target Arduino board).

    3. Properly connect the Arduino Uno to the uLCD-32PTU. See the application notes for this.

    Note 3.A: The sketch uses a software serial port for the display and a hardware serial port to print messages to the serial monitor.

    If without an Arduino host, you can still run this code example by performing step 1. Then use the GTX tool to send 4 bytes at a time to the display.

    Attached Files
    Doff
Working...
X