Announcement

Collapse
No announcement yet.

4DPI-32 P2 header pin configuration..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 4DPI-32 P2 header pin configuration..

    I'm not certain if there is a standard pin configuration for pin headers. I don't have any experience working with ribbon cables. I'm working on a PCB that will connect to the P2 connector via a 26 strand ribbon cable and I find the documentation on the header a little vague. What I need to know is if the pins are numbered, as I suspect, like the top pic or, less likely, the bottom pic? I don't have access to an oscilloscope right now, so I'd really like to avoid frying the display through guessing.
    Click image for larger version

Name:	WP_000816.jpg
Views:	49
Size:	449.2 KB
ID:	47226
    Attached Files

  • #2
    Hi MarkS

    It is the bottom pic, which is backed up by the Schematic in the Datasheet.

    Click image for larger version

Name:	P2-Header.png
Views:	19
Size:	72.4 KB
ID:	47231

    Hope that helps

    Regards
    James

    Comment


    • #3
      I'm glad I asked! I didn't see that in the datasheet and I wouldn't have guessed that was the configuration.

      Comment

      Working...
      X