Announcement

Collapse
No announcement yet.

uoled-128-g2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • uoled-128-g2

    I have uoled-128g2 and arduino uno-r3,use arduino to control the display to show pitcher. But i don't know how to get start to write code. Could you give me a code for example? or some example to practice.
    thank you everyone.
    Last edited by jimmy620520; 27th October 2015, 11:26 PM.

  • #2
    Hi Jimmy620520,

    Are you able to program the display module in ViSi? If no, you might want to read first the application note:

    ViSi Getting Started - First Project for Goldelox
    http://www.4dsystems.com.au/appnote/4D-AN-00118/


    To see all application notes related to Goldelox display modules (such as the uOLED-128-G2):
    1. Go to http://www.4dsystems.com.au/appnotes

    2. Select "Goldelox" under the Processor column

    3. Click 'Search"

    After getting acquainted with the basics of programming the display module, you may then proceed to interfacing it to an Arduino host. For more information, please see this thread:

    http://forum.4dsystems.com.au/forum/...x/48810-128-g2

    The application notes assume that the reader has a working knowledge of the Arduino platform.

    Hope the above helps and regards.
    Doff

    Comment


    • #3
      thank you.

      Comment

      Working...
      X