Announcement

Collapse
No announcement yet.

Playing tones using the beep command

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Playing tones using the beep command

    Using the command 'beep (note , duration)', according to the data sheet I should be able to enter values 1 to 64 for the note. I tried all the 64 values but I only hear 4 different frequencies. E.g. values 1 to 10 gives a note, 11 to 25 gives another note, etc. Shouldn't there be a separate note for each value?
    regards

  • #2
    Yep, sure should.

    That's a bug that's been there forever, and you are the first one to say something about it.

    Which display do you have (i.e. what PmmC do I need to send you)?

    Mark

    Comment


    • #3
      Hi,

      a friend of mine found another post on the topic (so I wasn't the first :-) :
      I also use the uOled-96-G2 and the workaround in this post solved the problem!
      Here is the link:

      http://forum.4dsystems.com.au/forum/...nt-frequencies

      Comment


      • #4
        Thanks for reporting that.
        Mark

        Comment

        Working...
        X