Announcement

Collapse
No announcement yet.

the format

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • the format

    Excuse me,I have a question.
    If I put the png image into Display Module by using wokshop4.
    After that what kind of format the image would be?
    thank you.

  • #2
    It's the same format as if you used Graphics composer. http://forum.4dsystems.com.au/forum/...isplay-modules
    Mark

    Comment


    • #3
      Excuse me,may I ask more detail?
      For you give me the link,
      http://forum.4dsystems.com.au/forum/...isplay-modules

      it say that the image format is as follows,

      Header (6 bytes as 3 words)
      word1 (Hi:Lo) = width : horizontal size of the image
      word2 (Hi:Lo) = height : vertical size of the image
      Word3 = colour_mode : 16dec = 65K colour mode, 16bits/2bytes per pixel (msb, lsb)

      The header is then followed by the pixel data
      Pixel1.....PixelN: Image pixel data and N is the total number of pixels
      N = height x width when colour_mode = 0
      N = height x width x 2 when colour_mode = 1

      Could you tell me what format is the pixel data??
      Is it like DC4B38 or FFFFFF??

      Comment


      • #4
        As the document says each colour is 16 bits.

        The usual 16bit colour format is 565, which means 5 bits of Red, 6 bits of Green and 5 bits of Blue.
        Mark

        Comment

        Working...
        X