Announcement

Collapse
No announcement yet.

media_Image returns error NAK data= 60

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • media_Image returns error NAK data= 60

    I am trying to display image on uOLED128G2 from micro sd card. I built usd raw data of one 128*128 jpg file with graphic composer and issued the following command from Arduino to the display.

    Code:
    Display.media_Init() ;
    Display.media_Image(0, 0);
    But it returns NAK error with error byte = 60. Other commands like Display.putstr is working.
    What does it mean and what should I do? Any help?

  • #2
    Have you checked the response from media_Init() to ensure the uSD is mounted?

    Regardless, the response does not make much sense. can you post all of your arduino sketch?
    Mark

    Comment


    • #3
      After more investigation, it turns out the error message happens at the different location. So I opened a new topic with different title (I put the whole arduino skech as well).

      http://forum.4dsystems.com.au/forum/...-micro-sd-card

      Can you please check it out?

      Thanks,

      Comment

      Working...
      X