Announcement

Collapse
No announcement yet.

Gen4-uLCD-24PT videoloop / just a video which shall loop (start from beginning)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gen4-uLCD-24PT videoloop / just a video which shall loop (start from beginning)

    Hello,

    I tried nearly everything so far but I'm not able to get it working that a video is going to start automatic again after the last frame....

    I mean this shouldn't be that complicated so maybe someone can help me

  • #2
    i found this forum entry: http://forum.4dsystems.com.au/forum/...=1478641153536

    when I compile it I'm getting a lot of failures and it's not working - any help woul really be appreciated

    Comment


    • #3
      Hi pixelschubser,

      I have attached a new project zip file in this post. You might want to try that one if its working.

      I have changed the sd card mounting part with this one:
      Code:
        
      
      if (!(file_Mount()))
              while(!(file_Mount()))
                  putstr("Drive not mounted...");
                  pause(200);
                  gfx_Cls();
                  pause(200);
              wend
          endif
      Thank you and Regards,
      Attached Files

      Comment


      • #4
        hi

        i want to do the same with some gen4-uLCD-24D

        play one or better random videos after power on

        i don't have the hardware at the moment

        could you confirm that it works?

        what must be the filename of the video at the sd card? xxxx.GCS ??

        thx

        tom
        Last edited by kapsreiter; 25 February 2018, 04:32 AM.

        Comment


        • #5
          Hello Kapsreiter,

          You should the Workshop4 IDE when using a video object inside your project. This way creating the proper graphics files and associated data files from the video files (.wmv or .gif) are simplified along with the coding part of the display. You can download and use the Workshop4 IDE for free here https://www.4dsystems.com.au/product..._IDE/downloads

          Best regards.

          Comment

          Working...
          X