Announcement

Collapse
No announcement yet.

help..uoled-96-g2 not responding

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Joseph Herrera
    replied
    Hi george1,

    Yup, for the gen4, you could use either the:
    - gen4-IB (interface board), FFC cable, 4D Programmer Cable or uSUB-PA5-II
    - gen4-PA (programming adaptor), FFC cable, and micro USB cable

    The distinct difference between the two is the number of break out pins. The gen4-PA's break out pins is designed for the GPIO capabilities of the Displays.

    For the usual version of the Displays, you could use the 4D Programmer cable or uSUB-PA to program the displays.

    Thank you and Regards,

    Leave a comment:


  • george1
    replied
    no luck with the USB-PA5
    but i connect now sucsesfuly using the
    • gen4-IB (Interface Board)
    • 150mm FFC Cable
    • gen4-PA (Programming Adaptor)
    i have left from my SK-gen4-24PT... its the same thing i guess...is it???
    Last edited by george1; 10th November 2016, 07:09 PM.

    Leave a comment:


  • Joseph Herrera
    replied
    Hi george1,

    You might want to take a look at this forum thread: (it includes checking drivers, connection status, etc)

    device is not responding:uOLED-96-G2
    http://forum.4dsystems.com.au/forum/...ng-uoled-96-g2

    Make sure that the connections are correct as this is a common problem for the OLED..
    For proper connections to the uOLED-96-G2, you can refer to this appnote, starting at page 8:

    http://www.4dsystems.com.au/download...0041_R_1_0.pdf

    Thank you and Regards,

    Leave a comment:


  • george1
    replied
    forgot to make clear that the screen is working and it plays the demo...but i cant find it in the com scan...

    Leave a comment:


  • george1
    replied
    i also tried to connect it using the
    • gen4-IB (Interface Board)
    • 150mm FFC Cable
    • gen4-PA (Programming Adaptor)
    i have left from my SK-gen4-24PT but again with no success

    Leave a comment:


  • george1
    started a topic help..uoled-96-g2 not responding

    help..uoled-96-g2 not responding

    Hello guys,

    just finish programming my Gen4 uLCD_24PTU screens and im very pleased with the resaults.
    Now i try to play with the uoled-96-g2 but when i scan the com it does not find it

    i use the μUSB-PA5... any ideas what im doing wrong

    with this μUSB-PA5 i program successfully my older uLCD_24PTU ...
Working...
X