Announcement

Collapse
No announcement yet.

4DPI-24-HAT Raspberry 3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Joseph Herrera
    replied
    Hi rcollamore,

    Can you post screenshots of your terminal when issuing a 'wget' command in a directory (just to make sure the file is not corrupt) and also when doing a 'ls' on the current directory and sudo tar' command?

    Regards,

    Leave a comment:


  • rcollamore
    replied
    Well the download shows up in my home/pi, I made a new folder and made sure it everything was in the correct directory and it gives me the same problem

    Leave a comment:


  • Joseph Herrera
    replied
    Hi rcollamore,

    Can you check your current directory on where your doing the command? Kindly make sure that the downloaded kernel can be found in the current directory or it has the correct filename.

    This might be related:
    http://askubuntu.com/questions/29122...e-or-directory

    Or can you also try creating a different folder, go/cd into the new folder then again try to do a

    wget http://www.4dsystems.com.au/download...50_v1.0.tar.gz

    then.. (make sure you're in the same directory)

    $sudo tar -xzvf 4d-hats_4-4-50_v1.0.tar.gz -C /

    Hope this helps,

    Leave a comment:


  • rcollamore
    started a topic 4DPI-24-HAT Raspberry 3

    4DPI-24-HAT Raspberry 3

    I am trying to install the kernal that supports the 4DI-24-HAT I get passed the download part but in the directions it's says to input this command $sudo tar -xzvf 4d-hats_4-4-50_v1.0.tar.gz -C / which I do but I get a error saying tar (child) cannot open : no such path, error is not recoverable exiting now, child returned status 2
Working...
X