Announcement

Collapse
No announcement yet.

WS4 connection Problem IoD-32T

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vertigo1206
    replied
    Hello,
    Ok thanks for the promt reply!
    It is just a little bit confusing, that some buttons and functions don't work with this display as described in the manual

    Leave a comment:


  • pauleilio
    replied
    Hello,

    Welcome to the forum

    The Comms information panel doesn't apply to Arduino based displays so you can ignore the "device not responding" message. As long as it to set to right com port then you will be able to Download code to the Display. It is important that the name of the board matches '4D Systems gen4 IoD Range'

    I hope this helps

    Best regards

    Paul

    Leave a comment:


  • Vertigo1206
    started a topic WS4 connection Problem IoD-32T

    WS4 connection Problem IoD-32T

    Hello,

    I have a abrand new starter kit SK-Gen4-IoD-32T.
    I already programmed other ESP8266, therefore I just edited the boards.txt as described in the manual.
    Then I installed WS4.
    Downloading and executing example codes via the Arduino IDE (1.6.11) works perfekt. program is downloaded and executed.

    But if I try to connect via WS4 (Comms - scanning port) I always the the error "device not responding"
    I also tried may different COM setting in the settings menu from WS4.
Working...
X