Announcement

Collapse
No announcement yet.

Serial Environment enabled after startup of gen4-28dt display ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • idexcorp-user
    replied
    Thank you for your help !

    It helps a lot.

    Leave a comment:


  • pauleilio
    replied
    Hello,

    Yes, the serial environment is already pre-loaded onto the display as the default application. The gen-28dt is ready to accept Serial SPE commands without flashing any software to the display.

    You can find the a detailed information about the Serial SPE commands here

    https://www.4dsystems.com.au/product...nual_R_2_0.pdf

    I hope this helps

    Best regards

    Paul

    Leave a comment:


  • Serial Environment enabled after startup of gen4-28dt display ?

    I have a display module of the type gen4-28dt, which has status of brand new, that means, without any previously loaded software.
    When I power up this module, a splash screen is displayed after a little boot up time. Is the serial environment already enabled inside
    the module or do I have to have to install it first using the specialized download button ?
Working...
X