Announcement

Collapse
No announcement yet.

How to enter multiple vars from Arduino to SmartObjects like SmartGauges ???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pauleilio
    replied
    Hi Cedric,

    Thats great to hear. Glad you found a solution, I will still send my version when completed.

    I would love to see a video.

    Kindest regards

    Paul

    Leave a comment:


  • ced1610
    replied
    Thank you for the done work...
    but i have found solution myself,
    very good job done by Pauleilio, no hésitations, by this brand, NO HESITATIONS...

    Cedric

    Leave a comment:


  • ced1610
    replied
    thank you Pauleilio, i was thinking that you forget me…
    ok, still waiting for your solution

    Cedric

    Leave a comment:


  • pauleilio
    replied
    Hi Cedric

    The core of this is done but at the moment the framerate isn't acceptable and not like the example shown. In that example there was no need to undraw parts that are likey to have changed so it is being done in such a way were undrawing isn't visually noticed which means extar maths.

    I will get the framerate faster and post it here when finished.

    Paul

    Leave a comment:


  • ced1610
    replied
    This Week is a very long Week… :-(

    Leave a comment:


  • ced1610
    replied
    Thank you Pauleilio, sorry for impatience…
    Cedric

    Leave a comment:


  • pauleilio
    replied
    Hi Cedric,

    Sorry for the delay.

    The example I showed you doesn't convert that well to your display so I am working on an alternative which should be finished before the end of the week,

    This version will give you the range of movement at the size you need.

    Best regards

    Paul

    Leave a comment:


  • ced1610
    replied
    Hello Pauleilio, any news ???
    thank you

    Cedric

    Leave a comment:


  • Raul
    commented on 's reply
    Buenas tardes, Necesito su ayuda por favor.

    Tengo uina 4DUINO y al momento de programarla la pantalla me muestra siempre "Mounting" y se queda asi siempre,

    Muchas gracias.

  • pauleilio
    replied
    Hi Cedric,

    Ok, I will try to modify this example to work with your display and simplify the code a little.

    Best regards

    Paul

    Leave a comment:


  • ced1610
    replied
    I understand,
    why not, can you give me a code to modify and reach our goal ???
    the exemple would be perfect, for looking how it works, and tune it a little...
    without Visi-Genie, it will be more hard but with a working code, it will be easy to do...

    Thank you, still wayting your return...

    Cédric

    Leave a comment:


  • pauleilio
    replied
    Hi Cedric

    That is ok, Thank you for the information.

    I have been doing the maths for your AI and it may not be possible to do this with a smartguage / userimages.

    -180 to 180 = 360
    -90 to 90 = 180

    so 360 * 180 = 64800 frames

    each frame of 400 x 480 16 bit pixels = 384000 bytes

    total SD memory = 64800 x 384000 = 24883200000 byes which is 24.8832 gb

    It may be possible to do this in code using primitives. This example uses a gen4-uLCD-43DCT https://www.youtube.com/watch?v=Ud_2Ixw4rZg using the page flipping function that is only available on this 4.3 display. It may still be possible to do this without page flipping, I will try to do an example.

    Best regards

    Paul

    Leave a comment:


  • ced1610
    replied
    Hello Pauleilio
    sorry for delay, i'm from France...

    pitch -90° ... 90°
    Roll -180° ... 180°

    Thank you soooo much to take interest...

    Cédric

    Leave a comment:


  • pauleilio
    replied
    Hi Cedric,

    Thank you for the images. I will try to do something with these. Did you have a maximum pitch roll degree in mind.

    Paul

    Leave a comment:


  • ced1610
    replied
    Hello Pauleilio...
    Thank you, nice to ear you...
    i manage the thing like this actualy :
    Gen-4ulcd-070DT connected to Arduino UNO with the V2 shield, arduino self powerred by tonel Jack... in 7.5v.

    my SmartGAUGE include only 3 files :
    layer 1 is the "plane" logo (fixed to center...)
    layer 2 is the background (blue/Brown) rotate
    layer 3 is the background (blue/Brown) up & down
    the usefull size is 480/400.

    must i give by arduino only a number that tell to the SmartGauge to print one of the image created ???
    one number for one image ???
    ... i attach you the files...

    Thank you


    Cédric
    Attached Files

    Leave a comment:

Working...
X