Announcement

Collapse
No announcement yet.

Update program / record program using uSD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Update program / record program using uSD

    Dear all,

    I have always program my diablo display using both the programming cable and the uSD, so as far as I understand, the Screen understand wht image to be burned in the uSD and recognize the microSD when it is plugged.
    I was wondering if there is a way to update the firmware, and to program the firmware (generated with visieGenie) only by inserting a new uSD in the screen. This is a very demanded feature in my sector, since the tecnicians have to update the firmware of the devices in situ. maybe it can be done with the option of uSD destination within the Project tab.

    Best regards.


    Eduardo.

  • #2
    Hi Eduardo,

    With regards to what you have mentioned,

    “I was wondering if there is a way to update the firmware, and to program the firmware (generated with visieGenie) only by inserting a new uSD in the screen.”

    You can load the program directly to the SD card without a need of connecting the display module to the PC through a programming module.

    As for your reference, kindly refer to the application note below.
    https://www.4dsystems.com.au/downloa...041S_R_1_0.pdf

    I hope it helps.

    Best Regards,
    Pearl
    Pearl

    Comment

    Working...
    X