Installing 4DPi-32 on RPi3-B+ possible?

[California]

Dear all, simple question: is it possible to install 4DPi-32 (rev 1.3) on RPi3-B+ and in case yes, does exist manual how to do it?

Regards, Vlado

[John Kevin]

Hello,

I have tried the latest kernel version with the latest Raspbian OS on a Raspberry Pi3 B+ and the 4DPi-32-II and this works as intended.
Though, I haven't yet tried to do it on 4DPi-32 I cannot see a reason why it should not work.

By following the datasheet for 4DPi-32, you should be able to use the 4DPi-32 as your Primary Display for the Raspberry Pi.

Since the image file on the datasheet is different, you can use the latest kernel image using this command:

wget http://www.4dsystems.com.au/downloads/4DPi/All/gen4-hats_4-14-34_v1.1.tar.gz

Then extract it using the command

sudo tar -xzvf gen4-hats_4-14-34_v1.1.tar.gz -C /

I hope this helps.

Best Regards,
Kevin

[California]

Thanks Kevin, it works ok.

Regards, Vlado

[John Kevin]

Hi,

I am glad that it works for you.
If you still have any concerns, please don't hesitate to ask.
We'll assist you as much as we can.

Best Regards,
Kevin