Announcement

Collapse
No announcement yet.

gen4-uLCD-70DCT-CLB-SB

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • gen4-uLCD-70DCT-CLB-SB

    Hi,
    I have a new project for this display and during ordering process i noticed that there are no output pins on display itself but just a 30 pin ribbon cable.
    Is there any module-interface with output-input pins to connect with this type of display?
    Programming module -4D UPA - looks like can do the job but in the presentation picture there are no output pins - just empty holes on PCB.
    Can you bring a little light in this matter?

    Regards
    Sorin

  • #2
    Hello Sorin,

    You're correct, the 4D-UPA is made to do this Job.

    Male header pins are not included in the package as it's left to the user's preference whether this is needed or not.

    In case necessary, these header pins are generic and easy to source out on other shops.

    You should be looking for 2.54mm (0.1") pitch, single row (male/female)headers.

    These are male headers that I found on RS, these should work fine.

    Male Headers:
    https://ph.rs-online.com/web/p/pcb-headers/2518351/

    Alternately, you can also solder your input/output device directly to the PCB, but please keep in mind that these connections will be permanent.

    Instead of buying the 4D-UPA separately, you might be interested in buying a starter kit instead.

    The starter kit includes a 4D-UPA, 5-way F-F Ribbon Cable w/ M-M Adaptor, and a 4GB microSD Card.

    gen4-uLCD-70D Series:
    https://www.4dsystems.com.au/product/gen4_uLCD_70D/

    I hope this clarifies your inquiry.

    Best regards,
    Michael

    Comment


    • #3
      Crystal clear!
      Thank you.

      Regards
      Sorin

      Comment

      Working...
      X