Announcement

Collapse
No announcement yet.

Kbroutines

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kbroutines

    Hi: I'm using ulcd4eDT with wifiapp and keybord CAPS not work? Could you helpme? Regards.

  • #2
    Hello Christian,

    Welcome to the forum!

    I have looked into the wifiapp ViSi program included in the 4D-AN-00129 appnote,
    and tried to simulate it on my end. I can confirm that the CAPS LOCK key
    wasn't functioning as it should be.

    Attached below is the modified program that should have a working CAPS LOCK:
    wifiapp.zip

    Please check this accompanied appnote as well to be guided further: http://www.4dsystems.com.au/appnote/4D-AN-00109/

    As you can see on that additional appnote, the application needs another module to make it work.

    Hope this helps and best regards,
    Sherwin
    Attached Files
    Last edited by sherwin4D; 23rd April 2019, 10:03 AM.

    Comment


    • #3
      Hi Sherwin
      Thanks a Lot for your help. I will test your attachment as soon as possible. I fix the problem using my own keyboard but in order to learn I will test your program. Best regards and thanks again.

      Comment


      • #4
        Hi Christian,

        Always glad to help. If you have other inquiries, just let us know. Good luck.

        Regards,
        Sherwin
        Last edited by sherwin4D; 23rd April 2019, 06:33 PM.

        Comment

        Working...
        X