Announcement

Collapse
No announcement yet.

Automatic program start after power on / init screen

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Automatic program start after power on / init screen

    Hi all,
    I just need a little hint:
    What do I have to do, so that after "power-on" (43DCT-CLB) my application is started automatically?
    And how can I change or deactivate the init screen?

    Thanks

  • #2
    Hello,

    Welcome to the forum!

    First off, could you please describe the project you are working on?
    That information would greatly help us suggest better solutions for you.
    What do I have to do, so that after "power-on" (43DCT-CLB) my application is
    started automatically?
    If you are using ViSi environment and you are referring to the default message prompt
    during the boot up of the display, you may uncomment these line of codes:
    Code:
    /*
        putstr("Mounting...\n");
        if (!(file_Mount()))
            while(!(file_Mount()))
                putstr("Drive not mounted...");
                pause(200);
                gfx_Cls();
                pause(200);
            wend
        endif
    */
    Basically, these lines of codes prints a message to the display if a microSD card is not
    inserted or not properly mounted.

    And how can I change or deactivate the init screen?
    Could you please explain further what you meant by "init screen"? Additionally, which WS4
    Environment are you working on currently?

    If you are using Serial environment, this thread might give you some hint regarding your
    project: https://forum.4dsystems.com.au/node/55189

    I hope this gives you some idea to apply on your project.

    Good luck and best regards,
    Sherwin

    Comment

    Working...
    X