Announcement

Collapse
No announcement yet.

Arduino - GEN4 ULCD 43DCT

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Arduino - GEN4 ULCD 43DCT

    Hi,
    I'm new to this topic. I tried to connect Arduino and the screen, I'm able to send commands from Arduino to the screen but I have problems in the opposite direction.
    I mean, I'd like to change Form when a Userbutton (already downloaded on the SD) is pushed. Do you have a small example to do that? And, should i change something from the IDE?
    Thank you,

    Sam

  • #2
    Hi Sam,

    Welcome to the forum!

    I mean, I'd like to change Form when a Userbutton (already downloaded on the SD) is pushed. Do you have a small example to do that?
    You may want to check this application note: AN-00030 ViSi-Genie User Button - https://4dsystems.com.au/blog/4d-an-00030/.
    Also, there is a Zip File on the link provided which you can use as a reference.

    Should you still have any concerns, please don't hesitate to ask.

    Best Regards,
    Kevin

    Comment


    • Sam93
      Sam93 commented
      Editing a comment
      Thank you very much! And, I have a last question, do you have any application note about typing in a string using the keyboard?

      Best regards,
      Sam

    • John Kevin
      John Kevin commented
      Editing a comment
      Hi Sam,

      Sure, no problem.
      For ViSi Environment, please take a look at this application note:
      AN-00073 ViSi Keyboard - https://4dsystems.com.au/blog/4d-an-00073/

      For ViSi-Genie, kindly refer to this application note:
      AN-00154 ViSi–Genie Magic Keyboard Edit - https://4dsystems.com.au/blog/4d-an-00154/

      Also, you may want to take a look at the example applications inside the Workshop4.
      Open the Workshop4, under the File Tab, click the Samples.
      Select the examples with a 'keyboard' name on it (under Picaso ViSi and ViSi-Genie Magic).

      Best regards,
      Kevin
Working...
X