Announcement

Collapse
No announcement yet.

uLCD-70DT Bezel

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • uLCD-70DT Bezel

    I bought a uLCD-70DT and a bezel gen4-BEZEL-70B from RS Components (UK). When I received both, I was very surprised. Although the bezel is for 7 "uLCD-70DT, the front cut is correct, but the mounting holes on the back of the bezel have a wrong position.The bezel has mounting holes spaced 177 mm horizontally and 92 mm vertically.The uLCD-70DT has mounting holes with 173 mm horizontal and 86 mm vertical.The frame cutout is 155.5 mm horizontally and 87 mm vertically. That's fine, the uLCD-70DT has a visible area of ​​153.8 x 85.6 mm. Therefore, only the mounting holes on the bezel are wrong. Strange that someone can make such product.
    The printed circuit of uLCD-70DT is labeled 2019 Hardware revision 2.2.
    After careful measurements, I discovered that all four mounting holes are always 2mm vertically and horizontally far moved.
    Last edited by JPL; 2 weeks ago.

  • #2
    Hi,

    Sorry to hear you are having a problem with your bezel. There are 2 types of Bezel, one type for the non gen4 displays and the gen4 version which looks like the one you received from RS components. Here is the RS components link for the non gen4 Bezel

    https://uk.rs-online.com/web/p/products/9028543/

    Could you please compare this one with the one you ordered.

    Best regards

    Paul

    Comment


    • #3
      Here is link for the other 7" Bezel

      https://uk.rs-online.com/web/p/displ...7089/?sra=pstk

      which I have bought. There is possible to download your datasheet. Unfortunately, on page 6 of the datasheet (Mechanical drawings) are no sizes of montage holes.
      In the Specifications of RS page (bottom) , the first line of the tabelle is: "Display Type Compatible With ULCD Display". But the same is for display you have mentioned in your link.
      On RS page you have mentioned is no link to datasheet.

      Comment


      • James_4DSystems
        James_4DSystems commented
        Editing a comment
        Thanks for raising this, I have passed this on to the appropriate person to get in touch with RS to see if they can improve their product pages and also upload the Datasheet that is missing.

    • #4
      Hi,

      This is the datasheet for the ULCD bezel

      https://4dsystems.com.au/mwdownloads...d/link/id/162/

      I hope this helps

      Best regards

      Paul

      Comment


      • #5
        Paul, thank you for datasheet. In the meantime, I have found it at Mouser and bought right bezel from Mouser.

        Comment


        • #6
          Hi,

          Thank you for the update, you're very welcome. Good luck with the rest of your project.

          Best regards

          Paul

          Comment

          Working...
          X