Announcement

Collapse
No announcement yet.

connection with a non-arduino processor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • connection with a non-arduino processor

    Hi,

    I am using uOLED-160-G2 display and atmel MCU(at90can128).

    How to print temperature data. Can you tell me step by step, please.

    good day.

  • #2
    Hi,

    Welcome to the forum,

    Unfortunately we don't have a specific step by step tutorial for using your selected micro-controller but depending on the programming environment you are using it may be possible to use or modify one of our existing libraries which you can find here.

    https://github.com/4dsystems/Goldelox-Serial-C-Library

    Also, you will find full details about the Serial command set in this manual

    https://4dsystems.com.au/mwdownloads...ad/link/id/31/

    In Workshop4 you can start a new project choosing your display and then click on Serial. When the Serial environment opens, click on Tools and then Serial Commander. This tool will allow you to send Serial commands to the Display and you will be able to see the Serial data sent for the chosen command, You might find this very useful as it will show you the data which you can then use in your own code.

    I hope this helps

    Best regards

    Paul

    Comment

    Working...
    X