Announcement

Collapse
No announcement yet.

Widgets in serial slave mode?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Widgets in serial slave mode?

    I'm learning the system slowly, so looking for ways to do things best... I'm working with Arduino Due & uOLED-160-G2.

    I'm planning to show the four digit number in a display with some additional graphical information on the side. Is there a easy way to use the ViSi widgets and fonts in a serial environment, or should I aim to somewhere else? I get the raw images from the SD card, but couldn't find information about the widgets.

    Thanks!

  • #2
    Hi,

    You can create the graphics like you have done in Visi and then use the Serial environment to control the display. Please take a look at these appnotes

    https://4dsystems.com.au/blog/4d-an-00085/
    https://4dsystems.com.au/blog/4d-an-00134/
    https://4dsystems.com.au/blog/4d-an-00086/

    There is also this appnote that deals with fonts

    https://4dsystems.com.au/blog/4d-an-00084/

    I hope this helps

    Best regards

    Paul

    Comment


    • #3
      Thanks for these! The AN's are good, finding them is just a little difficult, as the search button on your pages brings out only products.

      Just to confirm, the Goldelox_Serial_4DLib_h is the only library to be used. If I copy for example Leddigits to SD card in project build, there is no way to use them in SPI application?

      -v

      Comment


      • #4
        Hi,

        Just following up on this as our Appnotes section has been updated and has a new search function so might be worth taking another look.

        https://docs.4dsystems.com.au/app-notes

        Best regards

        Paul

        Comment

        Working...
        X