Announcement

Collapse
No announcement yet.

Comunication and connectivity

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FlorinG
    replied
    Well, now all makes sense. I was somehow misled by the generic title "Downloads" and I didn't look in there for manuals and datasheet. My bad.
    I must say I'm impressed by your range of products and attention to details. If the technical support is also fast, I'm sold.

    Leave a comment:


  • pauleilio
    replied
    Hi,

    Welcome to the forum,

    Thank you for your feedback.

    All our product pages have links to a datasheet for the particular display you view which will include commincation capabilties and available IO capabilities so as an example a gen4-uLCD-43DCT-CLB datasheet can be found in the Downloads tab of the products page.

    Product page - https://4dsystems.com.au/products/fe...ulcd-43dct-clb

    Datasheet Link - https://4dsystems.com.au/mwdownloads...ad/link/id/61/

    Sections 4.1, 4.5 and 4.6 deal specifically with communication ports and types.

    Our displays (apart from the IoD range) come pre - nstalled with our serial environment and is ready to receive the SPE serial protocol from an attached host using TTL serial as described here,

    Serial SPE commands Manual - https://4dsystems.com.au/mwdownloads...ad/link/id/12/

    In addition to this we have another Serial environment called Visi-Genie where you can use trhe full graphics tools from Workshop 4 to create your GUI and control using the Visi-Genie commds set.

    https://4dsystems.com.au/mwdownloads...ad/link/id/26/

    https://4dsystems.com.au/mwdownloads...ad/link/id/27/

    To further expand the connection to the outside world we have a range of MOTG modules for WiFi, Bluetooth, RS485 and RS2323

    https://4dsystems.com.au/products/4d...ules/motg-wifi

    https://4dsystems.com.au/mwdownloads...d/link/id/210/

    I hope this helps

    Best regards

    Paul

    Leave a comment:


  • FlorinG
    started a topic Comunication and connectivity

    Comunication and connectivity

    Hi
    I've read about your intelligent displays in 2019 PDF catalog and also throughout the website.
    I find there is no information on how the displays connect and communicate with the outside world. I mean, you did a great job describing what they can do as stand alone but I think you failed in showing the input possibilities, communication protocols, ports, etc.
    I hope you will provide in this topic some relevant links that could fill the void I've mentioned.
    Thanks
Working...
X