Announcement

Collapse
No announcement yet.

Sticker printer on 43DT

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pauleilio
    replied
    Hi,

    Yes that should be fine.

    Best regards

    Paul

    Leave a comment:


  • Lorenz
    replied
    Thanks for your quick answer. my screen is a gen4-43DT and I was planning to use a MAX IC to interface the RS232 (which must be very close to the MOTGRS232 ?

    Leave a comment:


  • pauleilio
    replied
    Hi,

    RS232 would be your best option for this in terms of connection and relatively easy serial control code. If your display is a non gen4 display then an TTL to RS232 converter would be fine.If it is agen4 then our MOTG-RS232 would be a neat way to add RS232.

    https://4dsystems.com.au/products/4d...les/motg-rs232

    Best regards

    Paul

    Leave a comment:


  • Lorenz
    started a topic Sticker printer on 43DT

    Sticker printer on 43DT

    Hello,

    I would need to add a sticker printer on my uLCD-43DT for a customer. I know it will be possible through RS232 but I was wondering if there would be another option ? (I use the uLCD-43DT alone)
    Thanks a lot for your help !
Working...
X