Announcement

Collapse
No announcement yet.

SK-pixxiLCD-39P4-CTP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SK-pixxiLCD-39P4-CTP

    Hello,

    I have ordered the SK-pixxiLCD-39P4-CTP.
    Then I installed the latest version of Workshop.
    However, the display cannot be found there.
    When will that be supported?
    Thank you for the effort
    Greetings and fun
    Andreas

  • #2
    Hello,

    Welcome to the forum.

    Sorry for the delay. The latest version of Workshop 4 with support for your display will be released by Monday.

    Best regards

    Paul

    Comment


    • #3
      Hello Paul,

      You are brilliant. It runs...
      Thanks a lot for this.

      Something different:

      Mouser had for the display (SK-pixxiLCD-39P4-CTP)

      https://www.mouser.de/Search/Refine?...TP&NewSearch=1

      a delivery time given at the end of August.
      Now in late September. I have canceled it.

      If I order the display from you in the shop and pay with a credit card,
      when do I have it on the table here in Germany?
      Greetings and thanks
      Andreas

      Comment


      • James_4DSystems
        James_4DSystems commented
        Editing a comment
        Hi Andreas
        Sorry best you address this question to our Sales team, Support cannot really answer that for you.

    • #4
      Hello,

      it is a SK-GEN4-50DCT-CLB-AR.

      Today I played a little with the current version of WorkShop.
      I think I made a bad mistake.

      There is a PmmC loader. I also used it once.

      Now the display no longer works properly - no touch function.

      I guess I have damaged the display drivers.

      I cannot find a driver with the exact name of my display.

      What do I have to do to make my display work properly again?
      Or is the display now hazardous waste and can it be thrown in the Garbage can?

      Thank you for the effort.
      Greetings and fun
      Andreas
      Click image for larger version

Name:	4d-Sytems.PNG
Views:	38
Size:	21.5 KB
ID:	72970

      Comment


      • #5
        Hi,

        Just to confirm, you only used the Auto-update of the PmmC loader?
        Also, on the account of not working properly, only the touchscreen is not working?

        To confirm if your touchscreen is working properly, you can check using the touch test draw sample project found in Workshop4:
        File > Samples > Picaso Designer > PICASO - TOUCH SCREEN > TOUCHTESTDRAW.4DG, upload this project and then draw on the screen to see if fully registers touch.

        Best Regards,

        Comment

        Working...
        X