Announcement

Collapse
No announcement yet.

"Update Banks and Run" on Pixxi Displays

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • "Update Banks and Run" on Pixxi Displays

    Is there a chance to get the "Update Banks and Run" on the Pixxies? We need to update the displays in the field with an SD Card like it is working with the Diablo16....

    Thanks

  • #2
    Hello,

    Pixxi does this without the need of the 'Update Banks and Run' stub program.
    If you go into your Project and go to the Project tab, hover over the Designation button for uSD, it will give you a popup tooltip.

    Essentially what you need to do is on the very first load, you set the destination to Flash and program the display. You only need to do this once. After that point set your destination to uSD card and just reload your uSD card and put it back in the display each time you change things and it will automatically update the program on your display.

    The stub program essentially goes in with the first program load to Flash. You can completely change the project to something else and you wont need to reload to Flash again, its only needed the first time.

    I hope that makes sense

    Regards
    James
    James

    Comment

    Working...
    X