Announcement

Collapse
No announcement yet.

File Transfer issues with Gen4 uLCD 24dt

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • File Transfer issues with Gen4 uLCD 24dt

    Hello,

    I am working with the 24dt uLCD through an Arduino and having issues getting the file transfer to work properly. I set the baud rate to what the screen sets but the screen will fail mounting. I am not sure if I have a setting incorrect but some suggestions would be greatly appreciated! I can use the uSD just fine, but would like to get the file transfer working.

    Thanks in advance!

  • #2
    Hi,

    Can you specify what environment you are using?

    Have you checked if the display is detectable by the Workshop4 IDE? You should see a blue traffic light as shown below.

    Click image for larger version

Name:	BlueTrafficLight.png
Views:	11
Size:	13.1 KB
ID:	77355

    make sure the uSD card is FAT16 formatted. If it isn't formatted to FAT16, you can use the RMPET.

    Click image for larger version

Name:	RMPET.png
Views:	6
Size:	38.6 KB
ID:	77356

    Also, these links might help you to fix the problem.Best Regards

    Comment

    Working...
    X