Script Touch variables

[devnull]

Hi;

Sorry, no it was not with the 4D products, it was doing 9-Bit SPI Bit-Bashing to drive the Nokia 6100 display....

[devnull]

I've used the GPIO Ports on the RPI using the Python WiringPi Wrappers and it works great, with bitbashing.

Python is pretty easy to learn,...

[devnull]

Hi;

Well because the micro is busy doing lots of other REAL-TIME stuff, it will only check with the display when it is free, which is maybe...

[devnull]

I now believe this can't be done in serial mode....

[devnull]

Hi;

I am trying to create a script that displays some buttons in the UP state, waits for a button press, and then displays the button PRESSED...

[devnull]

Thanks, yes I was using the FATController, now by using a serial terminal I can detect the touch with the Wait For Command using a Microcontroller or...

[devnull]

Thanks, but what I am trying to determine is how do I detect a press ??

Here's what I am doing now:

1) Enable Touch - Send 59...

[devnull]

Hi all;

Having worked though the serial graphic and text commands, I am now looking at the Touch Screen.

I understand the 3...

[devnull]

No, I am just testing and getting to know the system and finding my way around at the moment, it's not something I need right now.

I have...

[devnull]

The script is the sample script Graphics Pt1, when I run this from the FAT controller Script Commands > Script Execution it runs all the way, and finishes...

[devnull]

Thanks, yes that helped, the script still only executes half way and the log reports no response when it finishes, but I think that's a different problem....

[devnull]

Hi:

Thanks, the card is KINGSTON SDC4/4GB, here's the dumps:

============
The type of the file system is FAT....

[devnull]

Spent several hours trying and retrying using the uLcd43 in serial mode, and simply cannot get the display image or run program to work using FAT Controller....

[devnull]

Thanks very much, yes that was pretty much what I intended to do, it's working great using BS170, 100nf and 22K.

Thanks again

...

[devnull]

OK, I am a noobie and did not order the 4D programming cable with my display, as I read through the lines and misunderstood that a 3.3v USB > Serial...